Canon DXC-D35K, D35PK, DXC-D35L, D35PL, DXC-D35WSL, D35WSPL, DXC-D35H, D35PH Digital Camera User Manual


 
72 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
To call up files recorded onto a tape (when
using the DSR-1/1P)
First, connect the DSR-1/1P to the camera head and
load the cassette that contains the recorded files.
1 Set the SET UP switch to FILE.
2 Access advanced menu page 10.
3 Move the cursor to SELECT FILE and use the UP/
ON button or the DOWN/OFF button to select
TAPE.
4 Move the cursor to CHG FILE and press the UP/
ON button.
The screen appears as shown below.
5 Press the UP/ON button to call up the file. To
abort the call up operation, press the DOWN/OFF
button (the display returns to the one shown in step
3).
During the call up operation, the following display
appears.
When the call up operation ends, the display
changes as shown below.
The settings of the camera head are now replaced
by the settings in the called file.
Name of file
recorded onto
tape
Setup Files