Canon HF G30 Camcorder User Manual


 
Recording Movies and Photos
43
About the power saving mode: If q > [Auto Power Off] is set to [i On], the camcorder will
shut off automatically to save power when it is powered by a battery pack and is left without any
operation for 5 minutes. Use the power switch to turn on the camcorder.
When recording in bright places, it may be difficult to use the OLED screen. In such cases, you can
adjust the brightness of the OLED screen with the q > [OLED Brightness] setting.
Alternatively, you can also use the viewfinder (A 23).
Photos are recorded as JPG files. During and modes, the camcorder can take photos
during record pause mode or capture photos from a movie during playback (A 97). The photo size
and number of photos that can be saved on a 1 GB memory card are summarized in the following
table. However, the actual number of photos that can be recorded will vary depending on the
subject and shooting conditions.
Photos cannot be recorded while the digital zoom is activated or during dual recording.
You can capture a photo from a scene during playback (A 97).
When you need to record for a long time with the camcorder set on a tripod, you can close the
OLED panel and use only the viewfinder in order to save power when using a battery pack (A 23).
Reviewing the Latest Scene Recorded
You can review the last 4 seconds of the last scene recorded with the camcorder without switching to
mode. While reviewing the latest scene, the picture will be played back without sound. By
default, assignable button 5 is set to [ Rec Review] but you can set another assignable button to
this function (A 92).
1 Record a scene.
2 After you finish recording a scene, press .
Movie Format Recording mode Photo size Number of photos
AVCHD Any 1920x1080 660
MP4
35 Mbps, 24 Mbps, 17 Mbps 1920x1080 660
4 Mbps 1280x720 1,490
3 Mbps 640x360 5,800
Operating modes:
COPY