Filter
Top Products
Additional Information 157
Memory Card and Accessories
Cannot insert the memory card.
- The memory card was not facing the correct direction. Turn the memory card over and insert
it.
Cannot record on the memory card.
- The memory card is full. Delete some recordings (0 56, 105) to free some space or replace
the memory card.
- Initialize the memory card (0 41) when you use it with the camcorder for the first time.
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi-
tion of the LOCK switch.
- A compatible memory card must be used to be able to record movies on a memory card
(0 36).
- The folder and file numbers have reached their maximum value. Set 88 [Photo Num-
bering] to [Reset] and insert a new memory card.
Cannot upload files wirelessly using an Eye-Fi card.
- Files cannot be uploaded wirelessly while the camcorder is in or mode.
Change to a playback mode.
- You may have inserted the Eye-Fi card into memory card slot X. Insert it into memory card
slot Y.
- 68 [Eye-Fi Communication] is set to [Off] (i appears onscreen). Set it to [Auto-
matic].
- Opening the LCD panel may help when the wireless connection is not strong enough.
- If certain conditions occur while uploading files, such as the wireless connection getting too
weak, the camcorder may stop the wireless upload (h appears onscreen). Move to a loca-
tion with a stronger wireless signal.
- Files cannot be uploaded wirelessly while using the optional WM-V1 Wireless Microphone
(h appears onscreen). Turn off the microphone or disconnect the microphone from the AV
OUT/X terminal.
- Contact the card manufacturer’s customer care.
The wireless communication status icon does not appear
- You may have inserted the Eye-Fi card into memory card slot X. Insert it into memory card
slot Y.
There are brief stops in the sounds recorded by the optional WM-V1 Wireless Microphone.
- This may occur during recording if the LOCK switch on the Eye-Fi card is set to prevent writ-
ing, causing wireless communication to occur. Change the position of the LOCK switch.
COPY