Filter
Top Products
164 Additional Information
After using the camcorder for a long time, it becomes hot.
- The camcorder may become hot after using it continuously for long periods of time; this is not
a malfunction. If the camcorder becomes unusually hot or it becomes hot after using it only
for a short while, it may indicate a problem with the camcorder. Consult a Canon Service Cen-
ter.
Playback
Cannot add scenes to the playlist.
- The playlist can contain a maximum of 999 scenes. If the playlist includes scenes recorded in
MXP or FXP mode, the maximum number of scenes in the playlist may be less than 999.
- You may not be able to add to the playlist scenes recorded or edited using another device and
then transferred to a memory card connected to the computer.
- The memory is full. Delete some recordings (0 52, 97) or initialize the memory (0 36) to
free some space.
Cannot move scenes in the playlist.
- The memory is full. Delete some recordings (0 52, 97) or initialize the memory (0 36) to
free some space.
Cannot delete a scene.
- You may not be able to delete scenes recorded or edited using another device and then trans-
ferred to a memory card connected to the computer.
Deleting scenes takes longer than usual.
- When the memory contains a large number of scenes, some operations may take longer than
usual. Save your recordings (0 122) and initialize the memory (0 36).
Cannot delete a photo.
- The photo is protected. Remove the protection (0 109).
Cannot capture a video snapshot scene from a movie.
- You cannot capture video snapshot scenes from scenes recorded or edited using another
device and then transferred to a memory card connected to the computer.
- The memory is full. Delete some recordings (0 52, 97) or initialize the memory (0 36) to
free some space.
When playing back scenes/slideshow with background music, the music track is not played
back correctly.
- This can occur when you transfer the music files to a memory card connected to the com-
puter after repeatedly recording and deleting scenes (fragmented memory). Save your record-
ings (0 122) and initialize the memory card (0 36). Then, when the memory card is
connected to a computer, transfer the music files first and only then write back the recordings
made with this camcorder that were previously saved on the computer.