Filter
Top Products
176 Additional Information
Messages Related to the Optional DW100 DVD Burner
If an error message appears while the camcorder is connected to the
optional DW-100 DVD Burner, refer to the following section and also to
the instruction manual of the DVD Burner.
Cannot read the disc. Check the disc.
- During disc recording mode, this message can appear when a commercially available DVD
disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted.
Replace with a brand new disc.
- During disc playback mode, this message can appear when a commercially available DVD
disc or a brand new DVD disc is inserted. Replace with an AVCHD disc created with the DVD
Burner.
Close the memory card slot cover
- The memory card slot cover is open. Close the cover after correctly inserting the memory card
(0 34).
Connect the compact power adapter
- The camcorder is being powered by the battery pack. Connect the compact power adapter to
the camcorder.
Disc access failure. Check the disc.
- There was an error when reading the disc or attempting to write onto it.
- This message can appear also if condensation has formed (0 184). Wait until the DVD
burner dries completely before resuming use.
- The disc may be dirty or not correctly loaded. Try removing the disc and reinserting it after
cleaning the recording surface with a clean, soft cloth. If the problem persists, replace with a
different disc.
Error reading the data
- Check that the USB cable was not accidentally disconnected.
No disc
- Insert a disc into the DVD Burner.
- This message can appear also if condensation has formed (0 184). Wait until the DVD
burner dries completely before resuming use.
No photos
- There are no photos to add to the disc.
No scenes
- There are no scenes to add to the disc.
Operation canceled
- The USB cable was disconnected and the operation was canceled. Check the USB connection.