Filter
Top Products
Additional Information 159
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi-
tion of the LOCK switch.
- A compatible memory card must be used to be able to record movies on a memory card
(0 33).
- The folder and file numbers have reached their maximum value. Set 88[Photo Num-
bering] to [Reset] and insert a new memory card.
The wireless controller will not work.
-Set 68[Wireless Remote Control] to [On].
- Replace the battery of the wireless controller.
Cannot upload files wirelessly using an Eye-Fi card.
- You may have inserted the Eye-Fi card into memory card slot X. Insert it into memory card
slot Y.
- 68 [Eye-Fi Communication] is set to [Off] (i appears onscreen). Set it to [Auto-
matic].
- Wireless communication is not available in recording mode. Set the camcorder to playback
mode.
- Opening the LCD panel may help when the wireless connection is not strong enough.
- During wireless transfer, wireless communication may stop when the wireless signal condi-
tions worsen (h appears onscreen). Perform wireless transfer in a place with good signal
conditions.
- Contact the card manufacturer’s customer care.
The wireless communication status icon does not appear
- You may have inserted the Eye-Fi card into memory card slot X. Insert it into memory card
slot Y.
Connections with External Devices
Video noise appears on the TV screen.
- When using the camcorder in a room where a TV is located, keep a distance between the
compact power adapter and the power or antenna cables of the TV.
Playback looks fine on the camcorder but there is no image on the TV screen.
- The video input on the TV is not set to the video terminal to which you connected the cam-
corder. Select the correct video input.
- There will be no video output from the AV OUT terminal while the optional CTC-100 Compo-
nent Cable is connected to the camcorder’s COMPONENT OUT terminal. Disconnect the CTC-
100 Component Cable in advance to use the AV OUT terminal.
There is no sound from the TV.
- When connecting the camcorder to an HDTV using the optional CTC-100 Component Cable,
make sure to connect also the audio connections using the white and red plugs of the
STV-250N Stereo Video Cable.