Canon HV40 Camcorder User Manual


 
Playback
36
T
O
SKIP
10
OR
100
STILL
IMAGES
1 If the joystick guide does not appear
on screen, press ( ) to display it.
2 Push the joystick ( ) toward .
3 Select ( ) [ JUMP 10 IMAGES]
or [ JUMP 100 IMAGES].
4 Jump ( ) the number of images
selected.
Press ( ) to close the image jump
screen and display the image. You can
press ( ) again to hide the joystick
guide.
Slideshow
1 Press .
2 Select ( ) [ SLIDESHOW] and
press ( ).
3 Select ( ) [START] and press
().
Press to stop the slideshow.
Index Screen
1 Move the zoom lever toward W.
The index screen appears.
2 Select ( , ) an image.
Move the green selection frame to
the image you want to view.
If you have a lot of still images, you
may find it easier to browse entire
index pages instead. Move the zoom
lever toward W to extend the green
selection frame to the whole page, and
move ( ) through index pages.
Move the zoom lever toward T to
return to moving between single
images.
3 Move the zoom lever toward T.
The index screen closes and the
selected image is displayed.
Magnifying the Playback Image
During playback, movies and still images
can be magnified up to 5 times. You can
also select the area to be magnified.
1 Move the zoom lever toward T.
The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
To further enlarge the image, move
the zoom lever toward T. To reduce the
magnification, move the zoom lever
toward W.
will appear for images that cannot
be enlarged.
2 Select ( , ) the enlarged area
of the picture with the joystick.
To cancel the magnification, move the
zoom lever toward W until the frame
disappears.
SLIDESHOW
FUNC.
( 25)
FUNC.
FUNC.
( 12)
C OPY