Canon HV40 Camcorder User Manual


 
Trouble?
95
Additional Information
SET PRINT ORDER No still image on the memory card has been marked with a print order.
READJUST TRIMMING You changed the print style after you set the trimming settings.
PRINTER ERROR Cancel printing. Turn the printer off and then on again. Check the printer
status. If the error still persists, refer to the printer’s instruction manual and
contact the appropriate customer support center or service center.
HARDWARE ERROR Cancel printing. Turn the printer off and then on again. Check the printer
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on.
COMMUNICATION
ERROR
The printer is experiencing a data transfer error. Cancel printing.
Disconnect the USB cable and turn off the camcorder and the printer. After
a short while, turn them on again, set the camcorder to mode
and restore the connection. When you are printing using the button,
check the print settings. Or, you attempted to print from a memory card that
contains a large number of images. Reduce the number of images.
CHECK PRINT SETTINGS The print setting cannot be used for printing with the button.
PRINTER IN USE The printer is in use. Check the printer status.
PAPER LEVER ERROR Paper lever error occurred. Adjust the paper selection lever to the proper
position.
PRINTER COVER OPEN Close the printer cover securely.
NO PRINTHEAD No print head is installed in the printer or the print head is defective.
Message Explanation/Solution
C OPY