Filter
Top Products
Recording
Basic Functions
21
Basic Functions
Recording
Recording Movies
1 Move the lens cover switch down to
to open the lens cover.
2 Holding the lock button pressed
down, set the switch to
CAMERA.
3 Press to begin recording.
Press again to pause the
recording.
T
O
REVIEW
THE
LAST
SCENE
RECORDED
1 Set the mode switch to .
2 If the joystick guide does not appear
on screen, press ( ) to display it.
3 Push the joystick ( ) momentarily
towards and release it.
• The camcorder will play back a few
seconds of the last recording made
and return to record pause mode.
• You can also hold the joystick
pressed ( ) towards or ( )
towards to play back the tape
(reverse or forward respectively) to
locate the point where you want to start
recording.
W
HEN
YOU
HAVE
FINISHED
RECORDING
1
Close th
e lens cover and the
LCD
panel
.
2 Turn off the camcorder.
3 Remove the tape.
4 Disconnect the power source and
remove the battery pack.
NOTES
About the recording time
: By changing the
recording mode you can change the video
Recording
Before You Begin Recording
Make a test recording first to check if the
camcorder operates correctly. If
necessary, clean the video heads ( 2).
(7)
Start/Stop
Start/Stop
EXP
FOCUS