Canon MD111 Camcorder User Manual


 
Menu Options Lists
28
Display Setup (LCD Brightness, Language, etc.)
DISPLAY SETUP
Adjust ( ) the brightness of the LCD
display with the joystick.
Changing the brightness of the LCD
display does not affect that of the
viewfinder or the recordings.
[ NORMAL]*, [ BRIGHT]
* The default setting is [ BRIGHT]
when you power the camcorder using the
compact power adapter.
[ON], [ OFF]
[ON], [OFF]
When set to [ ON], the camcorder’s
on-screen displays will appear also on the
screen of a connected TV or monitor.
When the date and time are displayed on
the camcorder’s screen they will also
appear on a connected TV regardless of
the [TV SCREEN] setting. Turn off the
date/time display with the [DATA CODE]
setting ( 29).
[ OFF], [ LEVEL(WHT)],
[ LEVEL(GRY)], [ GRID(WHT)],
[ GRID(GRY)]
You can display a grid or a horizontal line
at the center of the screen. The markers
are available in white or gray. Use the
markers as a reference to make sure your
subject is framed correctly (vertically and/
or horizontally).
Using the markers will not affect the
recordings on the tape.
[ON], [ OFF<PLAYBK>]
You can hide the on-screen displays to
show only the playback picture on the full
screen.
Tape operation displays appear for 2
seconds.
Warning messages and the data code
(if activated) will appear, even when set to
[ OFF<PLAYBK>].
All on-screen displays will appear while
the playback image is magnified or a
digital effect is activated.
[ON], [OFF]
When you start playing back a tape or
when the date of the recording changes,
the date and time will be displayed for 6
seconds.
BRIGHTNESS
BACKLIGHT
( 17)
TV SCREEN
MARKERS
DISPLAYS
6SEC.DATE