Filter
Top Products
MiniTT1 on camera shoe
Speedlite on FlexTT5 mounted on
flash stand
Basic Wireless E-TTL II: MiniTT1 OO FlexTT5
No Flash on Camera
This simple mode of operation allows you to use one or more
remote E-TTL II ashes as one zone of light. All remote E-TTL II
ashes will re at the same power level which is chosen
automatically by the camera.
1. Slide the MiniTT1 Transmitter onto the camera
and tighten the locking ring.
2. Slide the remote Speedlite onto a FlexTT5
Transceiver, tighten the locking ring, and secure
the FlexTT5. Repeat for each remote Speedlite.
The remote Speedlites should be set to normal
mode, not <MASTER> or <SLAVE>.
3. Trigger normally.
O
Please read your Canon manuals on Fully
Automatic Wireless Flash (also called E-TTL II
Wireless Autoash).
This mode of operation is the same as using Canon’s
wireless system with one of the following directly in
the shoe of the camera:
• A Canon ST-E2 in non-ratio mode
• A 580EX (I or II) Speedlite in <MASTER> mode,
main ash off, in non-ratio mode.
12