Filter
Top Products
Channels
Channels enable you to work with other photographers and to keep your triggering exclusive. Some
channels operate on different frequencies to help you avoid interference. All PocketWizard radio slaves set
to the same channel work together.
ControlTL uses a new channel system in addition to the Standard channel system used in other
PocketWizard radios. The MiniTT1 Transmitter and FlexTT5 Transceiver can trigger all existing
PocketWizard radios. They can also be taught channels (including new ControlTL channels) by existing
PocketWizard transmitters. The FlexTT5 can operate as a receiver for any PocketWizard transmitter.
IMPORTANT: When a MiniTT1 or FlexTT5 is used as a transmitter, it always sends out 2 triggers, one
ControlTL trigger on a ControlTL channel, and one Standard trigger on its channel. This enables you to use
an E-TTL II system with other manual ashes. The ControlTL system synchronizes both triggers precisely.
MiniTT1 & FlexTT5 Channel HyperSync E-TTL II
Compatibility (See Page 25)
MiniTT1 ControlTL Channels 1 – 20 Yes Yes
FlexTT5 Standard Channels 1 - 32
Zones A, B, C
Plus II & Plus Standard Channels 1 – 4 Yes No
MultiMAX & MAX Standard Channels 1 – 16 Yes No
(see Page 25) Quad-Triggering Channels 17 - 32
(Zones A, B, C)
OEM units w/ PocketWizard Standard Channels 1 – 16 Yes No
(see Page 25) Quad-Triggering Channels 17 - 32
(Zones A, B, C)
Canon E-TTL II system channels are not used by the ControlTL system.
22