Filter
Top Products
Specifications (cont’d)
MiniTT1 FlexTT5
Camera/P1 Port 1/8” (3.5 mm) stereo miniphone for
2-stage remote camera triggering.
Port Voltage Handling: up to 50 Volts,
100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
Flash/P2 Port 1/8” (3.5 mm) mono miniphone.
Port Voltage Handling: up to 200 Volts,
4 amps peak, 250 milliamp continuous,
non-polarized
Voltage present 3.3 VDC (all pins) - safe for all Canon cameras 3.3 VDC (all pins) - safe for all Canon cameras
Hot Shoe voltage protection Hot Shoe: up to 50V Hot Shoe: up to 50V
USB 5VDC regulated, 100mA 5VDC regulated, 100mA
Pin 1 Positive, Pin 4 Ground Pin 1 Positive, Pin 4 Ground
Mounting Hot-shoe Hot-shoe, 1/4-20, lanyard, Velcro
Construction High impact plastic, captive battery door. High impact plastic, captive battery door.
Hot-shoe made of glass reinforced resin. Hot-shoe made of glass reinforced resin.
Dimensions 2.8” (7.1 cm) long x 1.9” (4.9 cm) 3.6” (9.2 cm) long x 2.9” (7.3 cm) wide x
wide x 1.3” (3.3 cm) tall 1.4” (3.6 cm) tall, antenna lowered
Antenna Internal 2.7” (6.9 cm) rubberized, 180 degree swing
Weight (with batteries) 2.3 oz (65 grams) 5.4 oz (153 grams)
2.0 oz (57 grams) without battery 3.8 oz (108 grams) without batteries
Operating Temperature Above -15 C (5 F) and below 50 C (120 F) Above -15 C (5 F) and below 50 C (120 F)
Storage Temperature Above -30 C (-22 F) and below 85 C (185 F) Above -30 C (-22 F) and below 85 C (185 F)
without batteries without batteries
37