Filter
Top Products
14 1. Preparing the Camera
Installing the Battery Pack/CF Card
Install the supplied Battery Pack NB-2LH and
CF card in the camera to get ready for
shooting.
When your camera is first used or the "Change
the battery pack" message is displayed, charge
the battery pack.
The use of the separately sold AC Adapter Kit
ACK700 is recommended to power the camera
during long usage sessions.
See Battery Performance (p. 155).
The Battery Pack NB-2L may also be used.
zWhen the upper indicator blinks green, the
camera is writing, reading, erasing or
transmitting an image to or from the card. Do
not perform the following or image data may
be lost or corrupted:
- Do not shake the camera.
- Do not turn off the power or open the CF card
slot / battery cover.
zTo protect the battery pack and prevent a
deterioration of its performance, do not
continuously charge it for more than 24 hours.
aAlign the edge of the battery pack
with the line on the battery charger,
then slide the battery in the direction
of the arrow.
b(For CB-2LT)
*
Plug the battery charger into a power
outlet.
(For CB-2LTE)
*
Attach the power cord to the
a
b
CB-2LTE
Charge
Indicator
Charge
Indicator
CB-2LT