Canon SX30 IS Digital Camera User Manual


 
Checking for Shut Eyes
101
Make the setting.
Press the qr buttons or turn the  dial to
choose the amount of flash output, then
press the m button.
XOnce set, ~ will appear on the screen.
When the camera detects the possibility that people have their eyes shut,
appears.
Choose [Blink Detection].
Press the n button, then choose
[Blink Detection] in the 4 tab. Press the
qr buttons to choose [On].
Shoot.
XWhen a person with shut eyes is detected,
a frame and appear.
You can also set the
flash output
. Press the
n
button and choose
[Flash Control] (p. 98) from the
4
tab. Then choose [Flash Output] and
press the
qr
buttons to choose a setting.
In M and B modes, you can set the flash output if you press the
n button and choose the 4 tab, then [Flash Control] and set the
[Flash Mode] option to [Manual].
When you press and hold the h button for 1 sec. or more, or with the
flash raised, if you press the h button and immediately press the n
button, the settings screen will appear.
Checking for Shut Eyes
In or $ mode, when the number of shots is set to two or more, this
function is only available for the last image shot.
In and modes, this function is only available for the last image
shot.
Not available in W, , or mode.
COPY