Canon SX30 IS Digital Camera User Manual


 
Changing Shooting Function Settings
162
Registering Functions to the Button
Choose [Set Shortcut button], then press
the m button.
Press the opqr buttons or turn the Â
dial to choose the functions to register,
then press the m button.
Pressing the button will call up the
registered function.
If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
When shooting movies, if you press the zoom lever toward j and zoom
out, the effect increases.
Choose if you want to return the button to default settings.
When this symbol is shown on the bottom right of an icon, the
function cannot be used in the current Shooting mode or function setting.
In , each press of the button records white balance data (p. 77),
and the white balance settings change to .
In %, each press of the button will adjust and lock the focus, and
% will appear on the screen.
If you press the button in , both the screen and viewfinder
displays will turn off. Try one of the following to restore the displays:
Press any button other than the power button
Change the camera’s vertical or horizontal orientation
Open and close the screen
Raise and lower the flash
COPY