Filter
Top Products
Changing Shooting Function Settings
161
Changing the IS-Mode Settings
● Choose [IS Mode], then press the qr
buttons to choose an option.
Shooting Info
Displays shooting information
(p. 179).
Grid Lines
A grid overlays the screen.
3:2 Guide
Gray bars will appear on the
top and bottom of the screen.
This area will not print when
printing on paper with a 3:2
aspect ratio.
Histogram
A histogram (p. 47) appears in
Shooting modes G, M, B,
D.
If you press the shutter button halfway and return to the shooting screen
from the custom display settings screen, the settings will not be saved.
• Gray items can also be set, however, they may not appear depending on
the Shooting mode.
• Grid lines will not be recorded on the image.
• [3:2 Guide] is not available in .
•
The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray areas.
Continuous
Image stabilization is always on.
You can confirm the effects
directly on the display, which
makes it easier to check the
composition or focus. When
shooting movies, the camera also
reduces strong camera shake, for
example when walking (Dynamic
mode).
Shoot Only*
Image stabilization is only active
at the moment of shooting.
Panning*
Image stabilization only counters
up and down motion. This option
is recommended for shooting
objects moving horizontally.
* Setting changes to [Continuous] when
shooting movies.
COPY