Filter
Top Products
Changing Shooting Function Settings
162
Registering Functions to the Button
● Choose [Set Shortcut button], then press
the m button.
● Press the opqr buttons or turn the Â
dial to choose the functions to register,
then press the m button.
● Pressing the button will call up the
registered function.
• If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
When shooting movies, if you press the zoom lever toward j and zoom
out, the effect increases.
• Choose if you want to return the button to default settings.
• When this symbol is shown on the bottom right of an icon, the
function cannot be used in the current Shooting mode or function setting.
• In , each press of the button records white balance data (p. 77),
and the white balance settings change to .
• In %, each press of the button will adjust and lock the focus, and
% will appear on the screen.
• If you press the button in , both the screen and viewfinder
displays will turn off. Try one of the following to restore the displays:
• Press any button other than the power button
• Change the camera’s vertical or horizontal orientation
• Open and close the screen
• Raise and lower the flash
COPY