Filter
Top Products
Using an Externally Mounted Flash (Sold Separately)
169
Turn the flash on, then turn the
camera on.
XA red h appears on the screen (or the
viewfinder).
XWhen the flash is charged, its pilot lamp will
light.
Display the flash settings screen.
● Press the n button to choose [Flash
Control] from the 4 tab, then press the
m button.
XThe options set on the flash will appear.
Make the setting.
● Press the op buttons or turn the  dial
to choose an item, then press the qr
buttons to adjust the setting.
● The available settings differ depending on
the flash (p. 170).
● In modes other than G, M, B, and D,
flash settings cannot be changed since the
flash adjusts and fires automatically.
Attaching the Hot Shoe Cap
● Attach the hot shoe cap when you are not
using an externally mounted flash.
If you hold down the h button for more than one second, you can also
display the settings screen.
COPY