Filter
Top Products
Using an Eye-Fi Card
173
Checking Connection Information
You can check the Eye-Fi card’s access point SSID, or connection status.
Choose [Connection info].
● Press the n button, then choose
[Eye-Fi Settings] from the 3 tab, and
press the m button.
● Press the op buttons or turn the  dial
to choose [Connection info], then press the
m button.
XThe Connection info screen will appear.
Disabling Eye-Fi Transfer
You can set the card to disable Eye-Fi transfer.
Choose [Disable] in [Eye-Fi trans.].
● Press the n button to choose [Eye-Fi
Settings] from the 3 tab, then press the
m button.
● Press the op buttons or turn the  dial
to choose [Eye-Fi trans.], then press the
qr buttons to choose [Disable].
What if [Eye-Fi Settings] does not appear?
[Eye-Fi Settings] will only appear when an Eye-Fi card is inserted in the camera.
If the Eye-Fi card has a write-protect tab, you will not be able to check the
card's connection status, or set [Eye-Fi trans.] to [Disable] when the tab is
in the locked position.
COPY