Filter
Top Products
3-9
Basic Settings
Camera Control
1
2
3
4
Setting Camera Control, Image Size and Quality (Camera and Video)
5
3 “Interlace Mode”
Select either “Weave (Interlace)” (for subjects which move a little) or “Bob (Non-Interlace)” (for
subjects which move a lot), according to the range of the movement.
You can obtain high-resolution video if you set “Video Capture Size” to “Large Size”. However
if the subjects move quickly and sharply, you may encounter comb-shaped blurs in the video.
“Bob” is more effective for quickly moving subjects.
4 “Use External Video Input”
You can use an external video input connected to the Multi-Terminal Module (VB-EX50) with
the switching method (→ P.1-10).
1 “Shutter Speed”
Sets the camera shutter speed.
2 “Focus Mode”
Sets the focusing mode for the camera.
Select the focusing mode for the camera from “Auto” (for auto focus), “Auto (for domes)” (for
the camera used in combination with a camera dome so that auto focus does not focus on the
camera dome wall surface) or “Fixed at infinity” (for focusing on infinity).
* “Auto (for domes)” and “Fixed at infinity” is not available if you configure the Night Mode settings (→ P.4-
65).
Note
If dust or rain adheres to the dome, focusing may occur on the dome wall. Please
place the dome wall and the camera as closely together as possible when using.