Filter
Top Products
PRINTING IMAGES
157
11
.
Use [̆] and [̄] to
specify the print option
you want.
• To print a single image:
Select “1 Image” and then
press [SET]. Next, use
[̇] and [̈] to select the
image you want to print.
• To print all images: Select “DPOF”, and then press
[SET].
• You can toggle date stamping of the image on and
off by pressing [DISP]. The
12
12
1
icon indicates that
date stamping is turned on.
12.
On the camera’s monitor screen, use [̆] and
[̄] to select “ Print” , and then press [SET].
• This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
• The print menu will appear when printing is
complete.
• If you selected “1 Image” in step 11, you can select
another image for printing and then repeat this step
to print.
13.
After you are finished printing, press the USB
cradle’s [USB] button, and then turn off the
camera.
■ Printing Precautions
• See the documentation that comes with your printer for
information about print quality and paper settings.
• Contact your printer manufacturer for information about
models that support PictBridge and USB DIRECT-PRINT,
upgrades, etc.
• Never disconnect the USB cable, or perform any camera
or USB cradle operation while printing is in progress.
Doing so causes a printer error.