Filter
Top Products
69
OTHER RECORDING FUNCTIONS
2.
Select the “ REC” tab, select “ Auto PF” , and
then press [̈].
3.
Use [̆] and [̄] to select the setting you
want, and then press [SET].
For this type of Auto Focus area:
Very limited range in the center of the
screen
• This setting works well with focus lock
(page 74).
Automatic selection of the focus area where
the subject closest to the camera is located
• With this setting, a wide focus frame,
which contains seven focus points,
appears on the monitor screen first. When
you press the shutter button half way, the
camera automatically selects the focus
point where the subject closest to the
camera is located, and a focus frame
appears at that point.
• This setting avoids the loss of focus of
foreground images that occurs when the
camera focuses on the background. It
comes in handy for simple snapshots
where the subject is not in the center of
the screen.
Select this:
Spot
Multi
To do this:
Turn on Auto Pan Focus
Turn off Auto Pan Focus
Select this setting:
On
Off
■ Specifying the Auto Focus Area
You can use the following procedure to change the Auto
Focus area used in the Auto Focus mode and the Macro
mode (page 70).
1.
In a REC mode, press [MENU].
2.
On the “ REC” tab, select “ AF Area” , and then
press [̈].
3.
Use [̆] and [̄] to select the Auto Focus area
you want, and then press [SET].