Filter
Top Products
APPENDIX
194
Indicator Lamp Reference
The camera has two indicator lamps: an operation lamp
and a self-timer lamp. These lamps light and flash to
indicate the current operational status of the camera.
* There are three lamp flash patterns. Pattern 1 flashes once per
second, Pattern 2 flashes twice per second, and Pattern 3 flashes
four times per second. The table below explains what each flash
pattern indicates.
Self-timer lampOperation lamp
■ REC Modes
Operation Lamp
Self-timer
Lamp
Green
Lit
Lit
Pattern 3
Lit
Pattern 2
Pattern 1
Red
Lit
Pattern 1
Pattern 2
Lit
Red
Pattern 1
Pattern 2
Operational (Power on,
recording enabled)
Flash is charging.
Flash charging is complete.
Auto Focus operation was
successful.
Cannot Auto Focus.
Monitor screen is off.
Storing image
Storing movie data /
processing image data
Self-timer countdown
(10 to 3 seconds)
Self-timer countdown
(3 to 0 seconds)
Cannot charge flash.
Memory card problem /
Memory card is
unformatted. / BESTSHOT
setup cannot be registered.
Memory card is locked. /
Cannot create folder. /
Memory is full. / Write error
Meaning
Amber
Pattern 3