Filter
Top Products
28
Snapshot Tutorial
The control panel can be used to configure camera settings.
1. In the REC mode, use [8]
and [2] to select the
setting you want to
change.
This will select one of the
control panel icons and
display its settings.
* Image quality cannot be changed using the control panel.
2. Use [4] and [6] to change the setting.
• You also can change this setting using the control dial.
3. If you want to configure another setting, repeat steps 1 and 2.
4. After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can configure settings other than those listed above (page 77).
Using the Control Panel
1
9
5
3
4
7
8
2
6
Control panel
[SET]
[8] [2] [4] [6]
Control dial
1
Image size/Quality* (pages 29, 87)
2
Flash mode (page 31)
3
ISO sensitivity (page 34)
4
White balance (page 34)
5
EV shift (page 36)
6
Metering mode (page 37)
7
AF area (page 37)
8
REC light (Single Shot mode) (page 39)
Continuous shutter (CS) speed (High-speed CS, Prerecord (Still image), Flash
CS modes) (pages 48, 50, 52)
Bracketing mode (Bracketing mode) (page 54)
View speed (Slow Motion View mode) (page 53)
9
Date/Time (page 39)
Prerecord (Still image) Time (Prerecord (Still image) mode) (page 50)
Flash continuous shutter (CS) images (Flash CS mode (with flash)) (page 49)