Filter
Top Products
45
Snapshot Tutorial
Back lighting correction compensates for the overexposure
that can occur when shooting a backlit subject. Press Æ
(Back Lighting Correction button) to toggle back lighting
correction on and off.
• When a main subject is overexposed due to backlighting,
the camera uses EV shift exposure correction and
dynamic range correction to adjust appropriately.
• This function is disabled in the M (Manual Exposure)
mode.
Pressing [AE-L/AF-L] temporarily locks the current
exposure and/or focus settings. Press [AE-L/AF-L] again to
unlock the settings.
• Pressing [AE-L/AF-L] while the shutter button is half-
pressed will lock the current exposure or focus setting.
Use the following procedure to specify the operation that the [AE-L/AF-L] button
performs.
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select “REC”.
3. Use [8] and [2] to select “AE/AF Lock” and then press [6].
4. Use [8] and [2] to change the setting, and then press [SET] to apply it.
NOTE
• AE Lock and AF Lock are not supported while “
O
Tracking” is selected for the “AF
Area” setting.
• Performing an EV shift operation while AE Lock is in effect will cause Auto
Exposure to be unlocked.
• Performing a zoom operation while AF Lock is in effect will cause Auto Focus to be
unlocked.
Correcting for Back Lighting
Locking the Auto Exposure and Auto Focus Setting
Specifying the [AE-L/AF-L] button Operation
AE Lock Exposure lock
AF Lock Focus lock
AE/AF Lock Exposure and focus lock
Æ (Back Lighting
Correction button)
[AE-L/AF-L]