Filter
Top Products
51
Snapshot Tutorial
4. Use [4] and [6] to select the continuous
shutter (CS) speed you want and then press
[SET].
• You also can change this setting using the control
dial.
5. Use [8] and [2] to select the bottom control panel option (Prerecord
(Still image) Time).
6. Use [4] and [6] to specify how many of the 60 images and for how
long images should be pre-recorded in the buffer.
• You also can change this setting using the control dial.
7. Press [SET].
• The approximate number of recordable
CS images will appear on the monitor
screen.
8. Half-press the shutter button.
This will cause the camera to start pre-recording images.
• The camera will not emit a shutter sound when you half-press the shutter
button while Prerecord (Still image) is selected.
9. Press the shutter button the rest of the way down.
This will record the images in the pre-record buffer and start recording new
images in real-time. Images continue to be shot as long as you keep the shutter
button depressed.
10.
Image recording will stop when you release the shutter button or after
a total of 60 images are recorded.
11.
Save the CS images (page 58).
CS speed
Number of pre-record images and pre-record time
Number of remaining images and remaining recording
time after the shutter button full-press
Shutter button full-press
Remaining snapshot
memory capacity
Number of recordable
CS images