Filter
Top Products
58
Advanced Settings
Advanced Settings
The following are menu operations you can use to configure various camera settings.
• You also can use the Control Panel (page 34) to configure some of the settings that
appear on the menu screen. Refer to the page references provided in this section
for information about configuring settings using the Control Panel.
. Example Menu Screen Operation
1. In the REC mode, press [MENU].
This will display the menu screen.
• Menu contents are different in the REC mode and PLAY
mode.
2. Use [4] and [6] to select the tab where the menu
item you want to configure is located.
3. Use [8] and [2] to select the menu item you
want, and then press [6].
4. Use [8] and [2] to change the setting of the
selected menu item.
5. After the setting is the way you want, press
[SET] to apply the setting and return to the
viewfinder screen.
• Pressing [4] instead of [SET] applies the
selected setting and returns to the menu item
selection.
• To configure settings on another tab after
pressing [
4] to return to the menu item selection,
use [
8] to move the highlighting up to the tabs,
and then use [
4] and [6] to select the tab you
want.
• Pressing [MENU] interrupts the menu operation and exits the menu screen.
IMPORTANT!
• Switching from “Auto” to “Premium Auto” (page 26) will make some menu items
unavailable.
Using On-screen Menus
[MENU]
[8] [2] [4] [6]
[SET]
Selected menu item
Example:
When “Focus” is selected
on the “REC” tab
Tabs
Settings