Filter
Top Products
52
OTHER RECORDING FUNCTIONS
Specifying Power On Default Settings
The camera’s “mode memory” feature lets you specify the
power on default settings individually for the recording
mode, flash mode, digital zoom mode, and white balance
mode. Turning on mode memory for a mode tells the camera
to remember the status of that mode when you turn off the
camera, and restore it the next time you turn the camera
back on. When mode memory is turned off, the camera auto-
matically restores the initial factory default setting for the ap-
plicable mode.
The following table shows what happens when you turn
mode memory on or off for each mode.
1.
In the REC mode, press MENU.
2.
Select the “Memory” tab, select the item you
want to change, and then rock the controller to
the right.
3.
Rock the controller up or down to select the
setting you want, and then click.
Mode Memory On
• Remembers the
current status
when the camera
is turned off, and
restores it when
the camera is
turned back on
again.
Mode Memory Off
(Factory Default)
Snapshot
Auto
On
Auto
Mode
Recording Mode
Flash Mode
Digital Zoom
Mode
White Balance
Mode
To do this:
Turn on mode memory so settings
are restored at power on
Turn off mode memory so settings
are initialized at power on
Select this setting:
On
Off