Filter
Top Products
55
Advanced Recording Settings
Procedure
Enter the REC Mode * MENU * LED
Use the LED light when shooting where lighting is dim. The effectiveness of the LED
light is reduced the further you are from the subject.
IMPORTANT!
• Do not turn on the LED light near a person’s eyes and do not allow anyone to look
directly into the light.
• You should compose the image so the main subject is in the center of the image
when using the LED light.
• Since the camera is equipped with a wide-angle lens, the center tends to be
brighter while the periphery tends to be darker.
Procedure
Enter the REC Mode * MENU * Image Size
This setting can be used to configure snapshot image size.
• The initial factory default image size setting is 12M (12 million pixels).
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
Using the LED Light (LED)
Auto LED lights automatically under dark shooting conditions.
On LED always lights.
Off LED never lights.
Changing the Image Size (Image Size)
Image Size
(Pixels)
Suggested Print
Size and
Application
Description
12M (4000
x
3000) Poster Print Good detail for better clarity even for
images cropped from the original on a
computer, etc.
3:2 (4000
x
2656) Poster Print
10M (3648
x
2736) Poster Print
Good detail
5M (2560
x
1920) A4 Print
VGA (640
x
480) E Mail
Image files are smaller, which is better
when attaching images to e-mail.
However, images are relatively coarser.
B