Filter
Top Products
OTHER RECORDING FUNCTIONS
103
3.
Press the shutter
button to record the
first image.
• The camera will record
the first snapshot and
then get ready for the
next one.
4.
Press the shutter button again to record the
next snapshot.
• If you are shooting into a three-frame layout, press
the shutter button a third time to record the third
image.
• Pressing [SET] during steps 3 or 4 of the above
procedure will toggle between the layout screen (the
one with the frames on it) and a screen that uses the
entire display area to compose the image you are
shooting.
• To clear the currently recorded Layout images and
restart an ongoing Layout operation, press [MENU].
Next, continue from step 3 above.
• You cannot save a multi-snapshot image unless
there are snapshots recorded in each of the available
frames.
Frame
IMPORTANT!
• Only the final multi-snapshot image is saved in
camera memory. The individual snapshots are not
saved.
• The size of the multi-snapshot image for this
operation is fixed automatically at 7M (3072
×
2304
pixels).
• While Layout Shot is being used, the setup of the
camera is changed automatically as shown below.
— ISO Sensitivity: Auto (fixed)
— AF Area: Spot (fixed)
• The following functions are disabled during Layout
Shot.
— Digital Zoom
— Self-timer
— Continuous Shutter