Filter
Top Products
OTHER RECORDING FUNCTIONS
88
3.
Use [̆] and [̄] to
select “Normal
Speed”, “High Speed”
or “Flash Cont.”, and
then press [SET].
• This causes the
applicable icon to
appear on the monitor
screen.
: Normal-speed Continuous Shutter
: High-speed Continuous Shutter
: Flash Continuous Shutter
• With “Off”, snapshots are recorded one at a time.
IMPORTANT!
• Turning off the camera automatically turns off the
Continuous Shutter Mode.
Normal-speed continuous shutter
Holding down the shutter button continuously records
images, as long as there is memory available to store
them. Release the shutter button to stop recording.
• You can select the flash mode you want with normal-
speed continuous shutter (page 63).
• The speed of continuous shutter recording depends on
the type of memory card loaded in the camera. When
recording to built-in memory, continuous shutter recording
is relatively slow.
High-speed continuous shutter
Holding down the shutter button while high-speed
continuous shutter is selected records up to three images
at high speed. Shooting stops if you release the shutter
button before three images are recorded.
• Flash is turned off automatically.
• Note that the resolution of images recorded with high-
speed continuous shutter is somewhat lower resolution
and more prone to digital noise than images recorded
with normal-speed continuous shutter.
•“Auto” ISO sensitivity always is used for high-speed
continuous shutter, regardless of the current ISO
sensitivity setting.