Casio EX-Z9 Digital Camera User Manual


 
103
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
Images will not display correctly unless the camera’s video signal output setting
matches the video signal system of the TV or other video equipment.
Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
Configuring USB Protocol Settings (USB)
Mass
Storage
Select this setting when connecting to a computer or other device
that supports USB DIRECT-PRINT (page 72). With this setting, the
computer sees the camera as an external storage device. Use this
setting for normal transfer of images from the camera to a computer
(using the bundled Photo Loader with HOT ALBUM application).
PTP
(PictBridge)
Select this setting when connecting to a printer that supports
PictBridge (page 72). This setting simplifies the transfer of image
data to the connected device.
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
NTSC Video system used in Japan, the U.S., and other countries
PAL Video system used in Europe and other areas
4:3 Normal TV screen aspect ratio
16:9 Wide screen aspect ratio