Filter
Top Products
13
Getting Started
3. Connect the USB
cable to the camera.
The LED indicator
should flash green,
indicating that charging
has started.
The LED indicator will
go out when charging is
complete.
It takes about
150 minutes to achieve
a full charge. Charging
may take longer
depending on charging
conditions.
LED indicator Operation
4. After charging is complete, disconnect the USB cable from the camera and
then unplug the adaptor from the power outlet.
Indicator Status Description
Flashing green Charging
Flashing green, fast Charging problem (page 78)
Off Charging complete
USB cable
(included with camera)
Making sure that the mark on the USB cable connector
is towards the lens side, connect the cable to the camera.
USB port
Small
connector
USB-AC adaptor
LED indicator