Filter
Top Products
17
Getting Started
To remove the SD/SDHC/SDXC card
1. Unlock and open the battery/memory card compartment.
2. Gently push the card until it pops out.
3. Pull out the card carefully.
NOTE
• Windows XP does not support SDXC cards (exFAT format). However, with
Windows XP (Service Pack 2 or 3), you can download an exFAT patch update to
enable support for SDXC cards.
Press the POWER button to turn the camera on or off. There are two ways to turn on
the camera.
• The startup image displays briefly and the startup sound plays if enabled. The
zoom lens extends and the camera is turned on in Record mode.
• The camera is turned on in Playback mode. The zoom lens is not extended.
To turn off the camera, press the POWER button.
See “Modes” on page 18 to know more about Record and Playback mode.
When you turn on your camera for the first time, you will be asked to do the initial
settings of your camera. First is the setup of language menu. Specify in which
language menus and messages are to be displayed on the LCD monitor.
1. Press the 8, 2, 4 or 6 keys to move through the languages.
2. Select a language, and then press the OK button to apply.
Turning the Power On and Off
Initial Settings
Setting the Language
B