Filter
Top Products
14
Getting Started
. To charge using a USB connection to a computer
The battery loaded in the camera is charged whenever the camera is connected
directly to a computer with the USB cable.
• Depending on the setup of your computer, you may not be able to charge the
camera’s battery over a USB connection. If this happens, use of the USB-AC
adaptor that comes with the camera is recommended.
1. Turn off the camera.
Check to make sure that the LCD monitor is blank. If it isn’t, press the POWER
button to turn off the camera.
IMPORTANT!
• If you connect the camera to a computer for the first time after you purchase it
while the camera is turned on, the computer will enter a camera recognition
operation. If this happens, perform the procedure on page 67. After the computer
recognizes the camera, turn off the camera.
2. With your computer turned
on, connect the camera to
it.
The LED indicator should
flash green, indicating that
charging has started.
The LED indicator will go
out when charging is
complete.
It takes about 150 minutes
to achieve a full charge.
Charging may take longer
depending on charging
conditions.
USB port
USB cable
(included with camera)
USB port
Large connector
Small connector
Making sure that the mark on the USB cable
connector is towards the lens side, connect the
cable to the camera.