Filter
Top Products
Operation Instructions On Screen Navigation
20
25B5.5 On Screen Navigation
1) Splash Screen
251BWhen the tool is powered on, the first screen displayed is
referred to as the splash screen. (Fig. 9) This screen tells you the
tool is booting up. Once the tool is fully powered up, the screen
will automatically switch to the live screen.
Fig. 9
2) 252BLive Screen
253BThe live screen is where you will do most of your work. A live
image of what the imager head sees is displayed on the screen.
You can zoom in or out, adjust LED brightness, rotate images
and video, view and capture photos and videos from this screen.
3) 254BSwitching from Still Image Capture to Video Capture
257BThe tool defaults to still image capture when powered on. Press
the 258B Video/Camera button to switch between still image capture
and video capture as needed.
4) Adjusting LED Brightness
255BPress the RIGHT and LEFT arrow buttons on the key pad (in
the still camera mode) to increase or decrease the LED
brightness. A brightness indicator bar will be displayed on the
screen as you adjust the brightness. (Fig. 10)