Filter
Top Products
Safety Instructions Work Area Safety
1
1. Safety Instructions
IMPORTANT: To prevent electric shock, fire and/or personal injury
or damage, read this user’s manual first and observe the following
safety instructions.
6B1.1 Work Area Safety
60BAlways perform automotive testing in a safe environment.
61BKeep your work area clean and well lit. Cluttered benches and
dark areas may cause accidents.
62BKeep clothing, hair, hands, tools, test equipment, etc. away from
all moving or hot engine parts.
63BOperate the tool in a well-ventilated work area.
64BDo not operate the tool in explosive atmospheres, such as in the
presence of flammable liquids, gases, or heavy dust.
65BKeep a fire extinguisher suitable for gasoline/chemical/electrical
fires nearby.
66BDo not use the tool around corrosive chemicals which can ruin
the photo quality.
67BKeep bystanders, children and visitors away while operating the
tool.
68BKeep the tool dry, clean, free from oil, water and grease. Use a
mild detergent on a clean cloth to clean the outside of the tool
when necessary.
7B1.2 Electrical Safety
70BAvoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators.
71BDo not expose the tool to rain or wet conditions. Water entering
the tool will increase the risk of electric shock.
72BDo not abuse the cord. Never use the cord for carrying, pulling,
or unplugging the tool. Keep cord away from heat, oil, sharp
edges or moving parts.
74BIf operating the tool in a damp location is unavoidable, use a
ground fault circuit interrupter (GFCI) to protect supply.