2-4
Cisco Video Surveillance 6400 IP Camera Installation Guide
OL-28494-01
Chapter 2 Camera Installation
Installing the IP Camera
Step 12 (Optional) If the camera is being install in an area of high humidity, remove the back cover from the
camera, place the included silica gel packet in the camera, and then replace the back cover onto the
camera.
Figure 2-1 IP Camera Installation Steps
What to do next
After you install the IP camera, follow the instructions in Chapter 3, “Performing the Initial Setup of the
IP Camera” to access and configure the IP camera.
1
2
4
3
5
6
7
8
B
A