Cisco Systems 6400 Security Camera User Manual


 
2-9
Cisco Video Surveillance 6400 IP Camera Installation Guide
OL-28494-01
Chapter 2 Camera Installation
Installing the Sun Shield
Step 7 Push the RJ45 plug into the housing (D) and tighten the sealing nut.
Step 8 Attach the gasket to the front surface of the housing (D).
Step 9 Connect the Ethernet cable to the RJ45 jack and tighten the waterproof connector.
Installing the Sun Shield
To install the sun shield, perform the following steps.
Procedure
Step 1 Attach the two included standoff screws to the top of the 6400 IP camera.
(E)