Preparing to Take Pictures
— 10 —
TV Out Signal Set-Up
The camera can be connected to a TV as described in Chapter 6, “Making Connec-
tions”. Connecting to a TV allows you to preview photos and video clips on the televi-
sion screen.
The TV output signal should be set to either NTSC or PAL depend-
ing on your region and the type of television you have. The de-
fault camera setting varies according to the country of pur-
chase.
NTSC:U.S.A., Canada, Taiwan, Japan, etc.
PAL: Europe, Asia (excluding Taiwan), etc.
1 Turn the Mode dial to any function except
PLAY or PC Cam.
2 Press the MENU button.
3 Press the Right button until the SETTINGS
icon ( ) is highlighted.
4 Press the Up or Down button to select the
VIDEO SYSTEM item.
5 Press the SET button to enter the VIDEO SYSTEM submenu.
6 Press the Up or Down button to select NTSC or PAL.
7 Press the SET button save the setting.
8. Press the MENU button to exit the menu.
Setting the Language
The camera can display menus and other information in a number of different
languages. The language can be changed in the mode menus.
1 Turn the Mode dial to any function except
PLAY or PC Cam.
2 Press the MENU button.
3 Press the Right button until the SETTINGS
icon ( ) is highlighted.
4 Press the Up or Down button to select the
LANGUAGE item.
5 Press the SET button to enter the LAN-
GUAGE submenu.
6 Press the up or down buttons to select the desired language.
7 Press the SET button to save the setting.
8. Press the MENU button to exit the menu.
NTSC
PAL
VIDEO SYSTEM
LANGUAGE
ENGLISH
DEUTSCH
FRANCAIS
ESPANOL
