Filter
Top Products
SensorScope
Before you get started
•It is recommended to use an AC adapter to power your camera
during cleaning. Check your owner’s manual to see if your camera
came with an AC adapter. Some cameras require an AC adapter to
enter sensor-cleaning mode.
•If you do not have an AC adapter for your camera, make sure your
camera’s battery is fully charged before cleaning its sensor. Some
cameras require that the battery be charged to certain percentage
before the sensor cleaning option becomes available. Loss of power
while cleaning the camera sensor can lead to damage.
Insert / Remove Batteries
•Take the SensorScope out of the box and insert the supplied
batteries into the battery compartment. To remove batteries use a
ballpoint pen. (see diagram)
7