D-Link DCS-942L Digital Camera User Manual


  Open as PDF
of 71
 
25D-Link DCS-942L User Manual
Section 3 - Conguration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to congure your new D-Link
Camera and connect the camera to the Internet.
Click Next to continue.
Select how the camera will connect to the Internet. If you are unsure how your camera will
connect to the Internet, select Automatic IP. If your ISP has assigned you a static IP, select
Static IP Address and enter the following details:
Enter the IP address that the camera will use on your network. You may need to
get this information from your ISP or network administrator.
The default value is “255.255.255.0.” Used to determine if the destination is part
of the same network segment.
The gateway used to forward data to destinations in a dierent subnet. Invalid
gateway settings may cause the failure of transmissions to a dierent subnet.
Primary domain name server that translates names to IP addresses.
Secondary domain name server to backup the Primary DNS.
Click Next to continue.
IP Address:
Subnet Mask:
Default Gateway
(Router):
Optional Primary
DNS:
Optional
Secondary DNS:
 previous next