Filter
Top Products
42D-Link DCS-942L User Manual
Section 3 - Conguration
IP Filter
The IP Filter is a feature used to allow or deny certain IP addresses when accessing the DCS-942L.
Access List
Filtering:
Filter Type:
IPv4 Filter List:
IPv6 Filter List:
Add New Filter.
Administrator IP
Address.
Check this box to enable the IP Filter function.
Select whether to set the lter to allow or to deny connection from the IP
addresses listed.
The current list of IPv4 addresses that are being ltered. Select a line and the
click the delete button to remove that entry.
The current list of IPv6 addresses that are being ltered. Select a line and the
click the delete button to remove that entry.
From the drop down menu, select whether to add a single IP, an entire subnet, or
a range of IP addresses. Enter an IP address, subnet, or IP range, then click Add
to create a new lter.
You can allow a single IP address to always have access to this camera, regardless
of the IP lter rules being used, by enabling this option and entering the IP
address.
Click Save Settings to save your changes.