Filter
Top Products
28D-Link DCS-942L User Manual
Section 3 - Conguration
Motion Detection Setup Wizard
This wizard will guide you through a step-by-step process to congure the motion
detection feature of your new D-Link Camera
Click Next to continue.
Enabling the Video Motion option will allow your camera to use the motion detection feature.
You may draw areas for your camera to monitor for motion..
Enable Video
Motion:
Enable PIR:
Sensitivity:
Drawing Mode:
Clear:
Select this box to enable the motion detection feature of your camera.
When this option is selected, use PIR (passive infrared) to detect motion.
Species the measurable dierence that would indicate motion. Enter a value
between 0 and 100.
Select Draw Motion Area to select the area of the picture to monitor for
movement to trigger recording or a snapshot. Use your mouse to click and
drag on the area that you would like to monitor for motion. Select Erase Motion
Area to clear a selected region and stop the camera from monitoring that area
of the picture.
Clears all motion detection areas from the picture.
Click Next to continue.