Filter
Top Products
30D-Link DCS-942L User Manual
Section 3 - Conguration
Enable:
Only During:
Video Clip Type:
Target:
Check this box to enable the Video Clip Notication function.
Check this box to setup a scheduled timeframe when notications should be
sent. This is useful if you do not want to be notied when it would otherwise be
inconvenient, such as during the night or on weekends.
The Video Clip Wizard uses Prole 2 by default. More information about video
proles can be found in “Audio and Video” on page 37. You can set the le type
from the drop down menu. You can also specify how many seconds before the
event that triggered recording should be sent, as well as how long the maximum
duration of the video clip should be in seconds.
Select where you want the video clip to be sent. It may either be uploaded to
an FTP or sent to an e-mail address. You will need to have all of the necessary
information lled out in order to use either of these features.
Click Next to continue.
Video Clip Notications is a feature to send recorded video via FTP or e-mail when a trigger
is activated. This step will only set up notications to be sent with video clips.