9
3. Audio plug – The audio plug connects the
headphone. Listen to music on the digital video
camera. At the same time, this can function as audio input/output
plug. Note: if using the radio function, the headphones have to be
plugged in to function as antenna to receive radio channels.
Back:
1. Power indicator light – Power indicator lights up with the camera is on.
2. MENU button – Under different modes, pressing this button can access the function menu
of each mode.
3. REC button – Between the mode selection buttons, mainly for video/audio recording
functions.
4. DISP/SET button – Under different modes will access the camera setup screen, as well as
turn on/off the LCD.
5. Power switch – Press to turn the camera on and off.
6. Busy indicator light – When camera is waiting for operation to finish, this light will flash.
7. Mode selection button – Selects modes.
8. Playback button – Under different modes pressing this button will switch to playback mode.
Left:
1. Up button (▲) – Under different MENU
selections, plays the previous song, photo, radio
station etc. Under photo mode, different flash modes can also be selected.
2. Down button (▼) –Under different MENU selections, enables the down selection, plays the
next song, photo, radio station etc. Under photo mode, can also be used to select macro
close-up mode. .
3. Confirm button (
) – Mainly used to confirm an operation, playback recorded audio, video files,
and music functions.
4. SD card slot – Opens the SD card slot, to insert and remove the SD card.
1.Power indicator
light
2. MENU
button
3. REC button
5.Power switch
4. DISP/SET
btton
6.Busy
/
DC-in indicator
7.Mode selection dial
8.Playback/station delete
1.Up button
2.Confirm
button
3.Down button
4.SD card slot
Deleted: menu
Deleted: and to