DXG Technology DXG-505V Camcorder User Manual


 
45
You can use the “video/audio out” on the digital video camera to output the video/audio to an
external device (such as: TV), the method is as below:
Step one Insert the black plug of the TV cable to the TV port on the back of the digital video
camera, and the yellow plug to the video in of the TV.
Step two Insert the white and red plug of the AV cable to the audio input of the TV port, and
the black plug to the back of the audio in/out port on the digital video camera.
Step three Switch the TV to the correct channel.
If the TV standard is not correct, you can switch to the appropriate standards
1. Enter the “camera setup” page.
2. Use the up button and down button to select “video out”.
3. Then use the up button and down button to select NTSC or PAL standards and
press the confirm button
.
Note:
Different TV manufacturers will have different broadcast channels, please
refer to the TV’s user manual.
6. How to use USB Pen-Driver data copy
6. Video/audio out