Filter
Top Products
49
Others One standard USB 1.1 port
For Microsoft Windows98SE/Me users, please connect the larger USB plug to the PC USB port
and the other end to the digital video camera USB port after installing the drivers and application
software. When the camera enters the “connection to PC” page, press the up button ▲ or down
button ▼ to select webcam and then press the confirm buttom ●. Then follow the below
procedures:
●Step one Right click on “My Computer”.
●Step two Then select “Device manager”.
●Step three Select “GENERIC IDE DISK TYPE47” and then choose “Properties” to show the
below screenshot:
●Step four Please select “DMA” and then press OK.
Note: When playing back video on the PC, make sure the PC has
DirectX8.0 or
newer versions and is supported