Epson 1280 Photo Printer User Manual


 
IMPORTANT READ CAREFULLY:
This Process License Agreement (“PLA”) is a legal agreement between you and Sawgrass
Technologies, Inc. (“Sawgrass”). By installing the SubliJet IQ
ink in your printer, or
otherwise using the Sawgrass SubliJet IQ
ink, you agree to be bound by the terms of this
PLA. If you do not agree to the terms of this PLA, Sawgrass is unwilling to license the
process of using the SubliJet IQ
ink to you. In such event, you may not use the SubliJet
IQ
ink, and you should promptly contact your supplier for instructions on return of the
unopened package.
The process of using the SubliJet IQ
ink is protected by U.S. and foreign patents. Sawgrass will
provide a complete list of the relevant patents upon request. The use of the SubliJet IQ
ink to
practice the patented process is permitted by this license.
GRANT OF LICENSE This PLA grants you the following rights: You may install and use the SubliJet
IQ
ink packaged herewith in your EPSON printer to practice the printing process described in U.S.
Patent No. 5,488,907. The use of any ink, dye or pigment to practice the Sawgrass Process, other
than a SubliJet IQ
ink purchased from Sawgrass or its authorized distributor accompanied by a PLA,
is not a licensed use of the Sawgrass Process. No rights to use the Sawgrass Process, except those
specified herein, are granted, and no rights to use any other process, product, software or hardware
developed or sold by Sawgrass are granted or implied hereby.
LIMITATIONS ON REVERSE ENGINEERING You agree that you will not attempt to reverse
engineer, reproduce or deformulate the SubliJet IQ
ink.
PATENTS AND COPYRIGHTS Sawgrass owns multiple U.S. and foreign patents, which apply to
the Sawgrass Process and/or the SubliJet IQ
ink or its use. All patents in and to the SubliJet
ink
and the method of using the SubliJet IQ
ink are owned by Sawgrass Technologies, Inc. You may
not copy the printed materials accompanying the SubliJet IQ
ink. All rights not specifically granted
under this PLA are reserved by Sawgrass Technologies, Inc.
Made In U.S.A.
CAUTION:
For best printing results, use the ink within six months of purchase.
Keep out of reach of children.
Do not expose ink to temperatures above 100
º
F or below 40
º
F.
Keep ink out of direct sunshine.
Sawgrass Technologies, Inc. agrees to replace any defective ink within a reasonable time, which
shall be Sawgrass’ sole responsibility for errors or defects in these goods.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED WARRANTY
OF FITNESS FOR A PARTICULAR PURPOSE. SAWGRASS SHALL NOT BE LIABLE FOR LOSS
OF PROFIT OR OTHER ECONOMIC LOSS, OR FOR INDIRECT, SPECIAL, CONSEQUENTIAL OR
OTHER SIMILAR DAMAGES.
SubliJet IQ is a trademark of Sawgrass Technologies, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Sawgrass Technologies, Inc. disclaims any and all rights in
those marks.